SPECIFICATIONS:

• 130 Barrel DOT 407/412, ASME “U” Stamp
• 5460 Gallons, plus 2%
• 25 PSI Internal, 15 PSI External, 38 PSIG
• Hydrostatic Test

OPTIONS:

• Self-Contained Pump Package
• Hydraulic Drive Pump Package
• Suspension: Air Ride or Single Point

DOT 407 / 412 SPEC, ASME “U” STAMP

• Capacity: 5460 Gallons, Plus 2% • Commodity: Unspecified Fluids
• Shell: 1/4” PL x 60” OD Head: 1/4 PL ASME F&D
• Corrosion Allowance: 0.04” Head, 0.05” Shell
• Baffle: (2) 1/4” PL Flat Flanged and Dished Each with Interior Shell Reinforcement Ring
• Stiffener: 3/8” x 2 1/2” Rolled Rings (8) External
• Welds: Internal Root, External Submerged-Arc, all Welds Solid
• Compartment: Single
• Suspension: Hutch 9700 w/8 Leaf Heavy Duty Springs
• Axles: 25,000 LB Round with Outboard Drums (2)
• Wheels: 10 Hole Steel Disc Hub Pilot • Tires: 11.00 x 24.5 Radials
• Brakes: 16-1/2” x 7” with Spring Parking, Auto Slacks, Bendix 4S-2M ABS
• Upper Coupler: Bolt on Adjustable
• Landing Legs: 2 Speed, Heavy Duty, High Capacity Lift
• Bumper: Heavy Duty per DOT Requirements
• Fenders: Full Length Formed Hose Pan (10 GA) with 1/4” Formed Supports Each Side of Trailer
• Tool Box: 18” x 18” x 36” on Driver’s Side with Sealed Door
• Mud Flaps: Anti Sail
• Valves: (2) 6” Rear Air Operated Butterfly valves with 6” – 4” Reducing Elbows, 4” Outboard Valves
• Reliefs: 1-1/2” Vacuum Relief, 2” Pressure Relief, both located at top front of barrel, 2” Blow Down Line at Rear
• Manways: Three located on Top, one on Rear Head, all ASME 20” Domed Style with Plated Swing Bolts and Wing Nuts
• Shut-Off: Ball Type Primary Ahead of First Manway with Air Operated Isolation Valve, Ball Type Secondary 12 Gal on Driver’s Side Front with Drain
• Over-Turn Protection: Fully DOT Compliant as Required (Pipe Construction with Longitudinal Bracing)
• Lights: Full DOT Lights, Sealed Lights, Harness and Junction Box with Terminal Strip, Two Rear Work Lights with Integral Switches
• Level Gauge: Ball Float with SS Ball Located in Rear Head
• V/P Gauge: 30-30 Vacuum/Pressure Gauge
• Coating: All Surfaces Whiter Metal Steel Grit Blast, 2.5mil Profile (SP-10), Interior Lined with Chemical Resistant 100% Solid Epoxy Liner, 20mil Dry Film Thickness. Exterior Coated with High Epoxy Primer and Color Coated with High Solids Polyurethane, 4-6mil Dry Film Thickness
• Placards: 4 – Placards • Fire Extinguisher: (1) Dry Chemical for Hydrocarbons
• Antistatic Cable: (1) Static Ground Cable with Clamp (50’)

[bsk-pdf-manager-pdf id=”13″]