BAFFLE: 2 – 1/4 pl flat flanged and dished each with interior shell reinforcement ring
STIFFENER: 3/8 x 2 1/2 rolled rings (10) external
WELDS: internal root, external submerged-arc
SUSPENSION: four- watson-chalin 30,000 lb. air ride with single leveling valve and manual dump valve, bolt on steel suspension assembly, 60,000 lb. capacity system. Lift axle on front. Stearable lift axle on rear
TIRES: 11.00 x 24.5 radial (22.5 radial on rear steerable)
BRAKES: 16 1/2 x 7 with spring parking, auto slacks, abs both axles
UPPER COUPLER: bolt on adjustable
LANDING LEGS: 2 speed, heavy duty, high capacity lift
BUMPER: 4 x 8 tube with tow eye fenders alum. front fenders. 30 ft length formed alum. hose pan (1/8”thk) at rear.
LADDERS: ¼” formed supports. driver’s side access ladder to alum. hosepan with ladder rungs to center top manway. Additional ladder rungs from driver’s side front fender to top front manway.
MUD FLAPS: anti sail
OUTLET: two 4” butterfly valves at rear with a wedge sump
RELIEFS: 1 1/2” vacuum relief, 2” pressure relief, both located at top front of barrel, 2” blow down line.
MANWAYS: (2) located on top, one on rear head, all 21” domed style with plated swing bolts and wing nuts
SHUT OFF: ball type primary in front manway, ball type secondary 12 gal on drivers side front with drain
LIGHTS: full dot lights, sealed lights, harness and junction box with terminal strip, two rear work lights with integral switches additional work lights on both driver/ passenger sides on side of barrel(2-ea per side) located at middle and rear of barrel.
SIGHT GLASS: 2” sight glass fittings in front and rear head. 1 1/2” plastic sight glass tube installed in rear head with clean out tees and 2” ball valves top and bottom
COATING: all surfaces white metal steel grit blast, 2.5 mil profile (sp-10), interior lined with chemical resistant 100% solids epoxy liner, 10-15 mil dry film thickness. exterior coated high build epoxy primer and color coated with high solids polyurethane, 4-6 mil dry film thickness.
HYDRAULIC DRIVE PUMP PACKAGE: fruitland rdf500 vacuum pump, 320 cfm @ 18” hg, 30 psi pressure, hydraulic drive motor, couplers and hose mounted and plumbed with oil catch muffler (25 gpmat 1000 rpm system requirement)
LEVEL INDICATOR: ball float type with pointer located in rear tank head.