BAFFLE: 2 – 1/4 pl flat flanged and dished each with interior shell reinforcement ring
STIFFENER: 3/8 x 2 1/2 rolled rings (9) external
WELDS: internal root, external submerged-arc all welds solid
COMPARTMENT: single
SUSPENSION: hutch 9700 spring w/8 leaf heavy duty springs
AXLES: 25,000 lb round w/outboard drums (2)
WHEELS: 10 hole steel disc hub pilot
TIRES: 11.00 x 24.5 radial
BRAKES: 16 1/2 x 7 with spring parking, auto slacks, bendix 4s-2m abs system
UPPER COUPLER: bolt on adjustable
LANDING LEGS: 2 speed, heavy duty, high capacity lift
BUMPER: heavy duty per dot requirements FENDERS: full length formed hose pan (10 ga) with 1/4” formed supports each side of trailer.
WALKWAY: installed on drivers side of trailer; full length grip strut walkway with formed pipe handrails rear access ladder, walkway support arm on each side of center
TOOL BOX: (2ea) 18 x 18 x 36. (1ea) on each side with sealed door
RELIEFS: dot specification 407/412, 3” stainless steel relief valve, located at top front of barrel, 2” blow down line at rear 2” internal bleeder/ blow down line from front 12”manway ran to bottom external of tank.2” valve (resun model no.: d125) with remote handle to rear of trailer for operation.
MANWAYS: four located on top. all asme 20” domed style with plated swing bolts and wing nuts
SHUT OFF: ball type primary in front 12” manway with air operated isolation valve, ball type secondary 12 gal on drivers side front with drain over turn fully dot complainant as required
PROTECTION: (pipe construction with longitudinal bracing)
LIGHTS: full dot lights, sealed lights, harness and junction box with terminal strip, two rear work lights with integral switches
LEVEL GAUGE: ball float with ss ball located in rear head
V/P GAUGE: 30-30 vacuum/pressure gauge
INTERNAL LINING: bottom of tank internaly lined with stainless steel sheet 24”wide x 12ga(.105) thk. full length of tank.
COATING: exterior surfaces white metal steel grit blast, 2.5 mil profile (sp-10), exterior coated high build epoxy primer and color coated with high solids polyurethane, 4-6 mil dry film thickness.
PLACARDS: 4 – placard frames
FIRE EXTINGUISHER: 1 – dry chemical for hydrocarbons
ANTI STATIC CABLE: 1 – static ground cable with clamp (50’)
OPTIONS:
SELF CONTAINED ENGINE/PUMP PKG: wittig rfl1000 vacuum pump, w/ 4 way valve and inlet filter. air operated 4 way valve w/ air control at rear of trailer. Direct drive to engine with clutched pump drive, 1:1 ratio, extended clutch operator to driver side. 28 hp @ 1800 rpm deutz air cooled engine. Pump engine package skid mounted transvers on trailer front porch. Engine rubber mounted to skid. Skid rubber mounted to trailer. All exhausts and mufflers mounted on trailer and plumbed.