LPG & NGL Skidded Storage Vessel

Dragon LPG and NGL vessels are engineered and built for severe-duty performance. They undergo the industry’s most exacting coating and lining process, for the highest level of corrosion resistance. All exterior surfaces are steel grit blasted to finish SP6 and coated with light color epoxy primer. Plus every new unit is National Board Certified and conforms to the latest ASME, Section VIII, Div. 1 rules for construction. Standard operating pressure and temperature are 250 PSI at 125°F. Dragon offers a full range of configurations, including skidded tanks that are available fully valved with load out station.

Capacities

12,000 Gallons
18,000 Gallons
30,000 Gallons
60,000 Gallons
90,000 Gallons

Configurations

Stationary Saddle Mounted
Skid Mounted
Mobile Storage Tanks

SPECIFICATIONS

• New manufactured tank – 18,000 & 30,000 gallon
• ASME Section VIII/Div 1 code compliant
• National board certified
• Buying direct from pressure vessel manufacturer
• Fully valved at factory and leak tested
• Load out station with integrated pump
• Prompt deliveries
• Severe duty engineered to consistently perform under punishing conditions

GALLON STORAGE TANK WITH STEEL SADDLES 250 LB. WORKING PRESSURE COMPLETE NEW VALVE PACKAGE

• (2) 2” Internal Spring Reliefs w/ Break-Away Couplings, Stacks and Flappers
• (1) Visual Sight Gauge installed
• (1) ¾” Combo Valve at 85% level w/Vent Valve & Liquid filled #400psi pressure gauge
• (1) 3” Fisher 2 way Internal Valve rated 300gpm for liquid outtake for pump
• (2) 2” Fisher 2-way Internal Valves rated 250gpm: (1) for quid in and (1) for Vapor Service
• All placards and signage are included with tanks to be installed after tank transport
• Hose Rack to protect hoses from ground exposure and tripping hazards

NEW BULK HEAD WELDED TO SKID WITH VAPOR HOSE AND LIQUID FILL HOSE

• (1) 2’ Snappy-Joe w/ Pneumatic Shut Down
• (1) 1 ¼” Snappy-Joe for Vapor Equalizing Connection between Truck and Tank
• (1) 2” Sight flow back check to visually confirm movement and unloading of product into Tank
• 14” Risers connected to Pneumatic System to provide System Shut Down in the event of pull away

NEW 3 INCH PUMP WITH 10 HORSEPOWER 3-PHASE ELECTRIC MOTOR

NEW SHUT DOWN SYSTEM

• Remote Safety Shut down Station located per NFPA 58, 2011
• Pneumatic system controls all internal valves OPERATED BY VAPOR PRESSURE, NITROGEN,

OR CUSTOMER SUPPLIED PRESSURE SOURCE (DRY AIR, CO2)

• Truck loading / unloading ESV’s (Provides protection at bulkhead)
• (1) 2’ Snappy-Joe w/ Pneumatic Shut Down
• (1) 1 ¼” Snappy-Joe for Vapor Equalizing Connection between Truck and Tank
• (1) 2” Sight flow back check to visually confirm movement and unloading of product into Tank
• 14” Risers connected to Pneumatic System to provide System Shut Down in the event of pull away 2” VAPOR AND 2” LIQUID SERVICE VALVES
• (1) 2” LPG Rated Hose assembly w/ swivel, Valves and required ACME Fitting
• (1) 1 ¼” LPG rated Hose assembly w/ swivel, Valves and required ACME Fitting
• 2” Angle Valve w/ required ACME fitting w/ screen and sight flow back

Options

• Blackmer 3” Pump, Motor, Base Assembly, 10HP 3-Phase motor w/ bypass. Approx 170gpm
• Blackmer 2” Pump, Motor, Base Assembly, 7 HP Single Phase Motor w/ bypass. Approx 70gpm
• Liquid Controls Meter 2” or 3” designed to customer specs
• Bulkhead can be configured on either side of the Tank
• Fitted with Openings and fitted with desired equipment at both ends
• Configured with or without pumps
• Tanks must and will be constructed to meet or exceed NFPA 58, 2011 code requirements

LITERATURE

Speak with one of our dedicated sales staff to learn more 800.231.8198

REQUEST QUOTE