BASE BEAMS: 16″ X 45lb Beam With (5) 16″ X 45lb Crossmembers
PULL PIPE: 4″ SCH 160 Pipe Each End With Caps
SUPPORTS: (5) Saddles With 3/8″PL Reinforcement Pad
TOP HATCH: (3)20″ X 20″ Hatch Width Locking Lid, One Each End At Ladder, One At Tank Center
DRAIN / FILL: 8″ Manifold With Hammer Unions And Caps, (4)4″ Pipe Couplings, Elbow Turn Down to Floor Inside, 8″ Valve, 6″ Manifold With Hammer Unions And Caps, (4)4″ Couplings, 6″ Valve, 4″ Bottom Suction On Each End Width Valve, 6″ Jet Line With (4)3″ Discharges Width 1 1/2″ Swedge Nipples, Jet Line Through Each Head Width 6″ Valve On Mainfold End And 4″ Valve On Clean Out End.
MANWAY: 21″ Manway Clean Out On End
LADDER: One Each End Outside, One Inside At Center Hatch
FINISH: Interior Steel Grit Blasted, Coated With 100% Solids Epoxy Chemical Resistant Lining (10 mil dft), Exterior Steel Grit Blasted, Coated With Epoxy Primer, Top coated With Polyurethane Color
HYDROTESTING: Full Capacity Static Test
DIMENSIONS: Overall; 40′-7″ Long, 10′-6″ Wide, 11′-8″ High Shell; 10′-6″ dia, 31′-8″ Head Seam To Head Seam, 500 Barrel Capacity
Speak with one of our dedicated sales staff to learn more 877.231.8198