SPECIFICATIONS:

• Type: Aluminum vacuum tank trailer, non-dot spec
• Capacity: 7,000 Gallons +2%
• Length: 42’ 6” Height: 10’ – 11 1/2”
• Commodity: unspecified oilfield fluids design
• Pressure: 15 psi internal, 22 inhg external
• Shell: 1/4 aluminum pl x 66-1/2 in o.D.
• Heads: 5/16 Aluminum pl, ASME f&d shaper
• Compartment: Single
• Baffle: 3 – 1/4 aluminum pl flared & dished
• Stiffener: Rolled aluminum channel rings (11) external
• Suspension: Two – Watson-Chalin 30,000 lb. Air ride with single leveling valve and manual dump valve, bolt on steel suspension assembly, 60,000 lb. capacity system
• Axles: 25,000 lb 5” round, 5/8” wall w/outboard drums (2)
• Wheels: 10 hole steel disc hub pilot
• Tires: 11.00 X 24.5 Radial cut/chip resistant
• Brakes: 16 1/2 x 7 with spring parking, auto slacks, abs both axles
• Upper coupler: bolt on adjustable
• Landing legs: 2 speed, heavy duty, high capacity lift
• Bumper: 4 x 8 tube with tow eye, steel
• Hose tray: Full length aluminum, located on each side
• Fenders: none
• Walkway: Formed supports. Drivers side safety walkway with handrails and ladder full length with rear walkup
• Tool box: 1 – drivers side with sealed door
• Mud flaps: anti sail, front and rear
• Outlet: Two 4” brass lever gate valves, 4” riser pipe on passenger side
• Reliefs: 1 1/2” vacuum relief, 2” pressure relief, both located at top front of barrel, 2” blow down line at rear, discharge located behind fender
• Manways: four located on top, one on rear head, all domed style with plated swing bolts and wing nuts
• Shut off: Ball type primary in front manway, ball type secondary on drivers side front with drain
• Over turn protection: three – solid plate type over turn device, located at front, center and rear
• Lights: led type, full dot lights, sealed lights, two rear work lights
• Ball float: per customer request
• Coating: All steel surfaces white metal steel grit blast, 2.5 Mil profile (sp-10), coated high build epoxy primer and color coated with high solids polyurethane, 4-6 mil dry film thickness
• Liner: Interior lined with chemical resistant 100% solids epoxy liner, 20 mil dry film thickness

[bsk-pdf-manager-pdf id=”33″]